1. Users should be familiar with the contents of the safe operating procedures of this woodworking lathe, which is a manifestation of responsibility for personal safety. Pay special attention to the fact that although you wear a full set of overalls including hats and goggles, you are not allowed to wear gloves to use the machine. Also, although the woodworking lathe has a relatively high cleaning requirement for the lathe, it is not possible to use compressed air as a cleaning agent to clean the woodworking lathe including the electrical cabinet, the NC unit and the like.

2. When it is wet, it is best to open the machine of the woodworking lathe to make it operate. The running machine will not get wet due to weather problems, which will lead to rust. And if you have placed a lathe that has not been opened for a while, be sure to check whether the lubricating oil in each place is sufficient, and you can't put it into use immediately. There must be a warm-up period. It's like having to do some warm-up exercises before swimming to reduce the chance of cramping in the water. Preheating can reduce the probability of machine failure and is also a kind of maintenance.

3. Although the woodworking lathe has achieved automatic production, users should never leave the lathe when the machine is running again. In order to ensure that the woodworking lathe is abnormal, you can take immediate action to stop using the lathe immediately. There is one more common sense but it must be checked whether the parts are fixed on the lathe for stability. This is very important, and once it is not done, it will be very easy to have an accident. Another point is that the woodworking lathe is afraid that the temperature is too high, and it is often necessary to check whether the temperature is within the specified range during the production process.