Hello, welcome to visit the website of Dongguan Baoying Wood Machinery Co., Ltd.!
|
The panel sawing machine belongs to a large-scale machine, and the movement must be strictly in accordance with the requirements. The following is the requirement of the woodworking machinery panel saw operation. 1. Before the panel saw machine is started, the saw blade pad and the compression nut and the screws of each part must be carefully checked. If it is found to be loose, it should be tightened in time. When installing the saw blade, pay attention to the cutting direction and irreversible. 2. The woodworking panel saw does not allow the saw blade to work without a protective cover. 3. When the precision push-pull panel saw is manually fed, the wood must be placed close to the workbench and positioned against the board. The hand should not be too close to the saw blade. It is strictly forbidden to process wood that cannot be controlled by the hand. 4. Before the wood is processed, it should first check whether the wood is sawed at the place where there are nails, sandstone, joints, etc., in order to prevent damage to the saw blade and the joints flying out and hurting people. 5, precision cutting board saw cutting direction can not stand, the operator should pay attention to safety when collecting wood. 6. When cleaning the machine, wiping the lubricant, removing the saw blade and removing the sawdust, the power must be cut off first. 7. When the precision panel saw fails, the power should be cut off immediately, and the operation should be stopped. The repair and adjustment should be carried out by a special person, and the machine tool is not allowed to operate with faults. |
