1. Check the various parts of the CNC woodworking lathe and the fixtures and fixtures. It is flexible and reliable. The workpiece should be clamped and tightened with the thimble. Turn the test run by hand to confirm that the situation is good before driving, and select according to the softness and hardness of the workpiece. The amount of feed that is made and the speed of adjustment.
2. Check the motor and mechanical system to ensure there is no abnormal noise.
3. Check the lubrication of all parts of the CNC woodworking lathe.
4. Check that the protective cover and door and other safety protection devices are safe and working properly.
5. Check the belt tightness. If it does not meet the requirements of the manual, please adjust or replace it. The belt should be intact and not damaged.
6. During the turning process, the smoothness of the workpiece should not be checked by hand. When sanding with sandpaper, remove the knife holder first. When the lathe is turning, do not use your hand to brake.
7. When checking the tightness of the belt on the CNC woodworking lathe, do not put your fingers between the belt and the pulley, and it is easy to crush the finger.
8, square wood, must be processed into a cylinder before processing on the lathe. Wood with knots or cracks shall not be cut on a lathe.
9. The temperature rise of the CNC woodworking lathe should be carried out without load under the automatic operation state of the lathe. The lathe can be operated for 10 to 20 minutes at a maximum speed of one or one third of the maximum speed of the lathe movement, so that the lathe reaches a stable temperature.
10. Before the spindle is running, the chuck or the chuck should be tightly pressed to prevent the chuck jaws from coming out or the chucks flying out.
11. In the automatic operation, all moving parts on the lathe should be automatically operated according to the program, and the movement of each moving part should be checked at the same time, and there should be no abnormal noise.
12. According to the lubrication parts and lubrication requirements specified in the machine operation manual, regularly inject the specified slip oil or grease to ensure the flexible operation of the mechanism.
13. Regularly check whether the electrical equipment of the machine tool is damp and safe, and remove dust, prevent metal objects from falling, and do not work with faults.
14. If the CNC woodworking lathe is idle for a period of time, it must be temperature-lifted on the lathe. In order to make the lathe last long, the accuracy is stable and reliable.