Correct cleaning of the cutting tool and cutting area of the milling bottom slotting machine is a key step to ensure long-term stable operation of the equipment and maintain machining accuracy. The following cleaning procedures are designed to help operators clean effectively:

1. Power off

Before starting any cleaning work, the first priority is to ensure that the machine is completely powered off to avoid injury from accidental start-up. Turn off the main power switch and unplug the power to ensure that the machine is in a safe condition.

2. Remove chips

Using a soft brush or a dedicated chip removal tool, gently remove chips from the surface of the tool and cutting area. Avoid using hard tools to avoid scratching the tool surface or precision parts in the cutting area. For hard-to-reach corners, you can use compressed air to carefully purge, but avoid pointing the tool directly to avoid damage.

3. Use detergent

For stubborn stains or oil stains, you can use a moderate amount of detergent. Choose a neutral cleaner suitable for the metal surface and avoid using aggressive chemicals that will damage the tool or the material in the cutting area. Spray the cleaner on a soft cloth, then gently wipe the tool and cutting area until the stain is completely removed.

4. Wipe and dry

Using a clean soft cloth or dust-free paper towel, dry the tool and cutting area thoroughly. Ensure that all moisture and detergent residues are removed to avoid water stains or chemical residues that can accelerate corrosion and wear.

5. Check the tool status

During the cleaning process, carefully check the wear of the tool. If the surface of the tool is found to have obvious scratches, pits or passivation, the new tool should be replaced in time to ensure the processing quality and the normal operation of the equipment.

6. Lubrication maintenance

After cleaning, properly lubricate the tool and cutting area. Apply the recommended lubricant evenly to the tool and moving parts to reduce friction, prevent rust and extend the service life of the tool and machine.

7. Perform regular maintenance

Incorporate cleaning and maintenance of tools and cutting areas into your daily maintenance schedule, with regular inspections and cleaning. According to the frequency of use and processing conditions of the equipment, develop a reasonable maintenance cycle to ensure that the equipment is always in the best condition.

The correct cleaning of the cutting tools and cutting areas of the milling bottom slotting machine can not only maintain the machining accuracy of the equipment, but also extend the service life of the tools and machines and reduce maintenance costs. By following the above cleaning process, operators can effectively clean and ensure the long-term stable operation of the equipment.